Description
Undercounter, hot water sanitizing, up to 30 racks/hour, 6kW booster heater and 5kW wash tank heater. 14-1/2” maximum clearance for wares, pump drain, and upper/lower stainless steel rotating wash and final rinse arms. Automatic fill. Only requires two power wires and a ground. Safe-T-Temp feature assures a 180°F final rinse, built in chemical pumps and delime switch. EPA Energy Star 3.0 certified.
Features & Benefits
- Automatic fill.
- Energy Star 3.0 certified.
- The 2 minute timer includes the built-in, automatic Safe-T-Temp feature, which assures a 180°F sanitizing final rinse, every cycle.
- Top mounted controls are easy to read and simple to operate.
- Large 14-1/2″ height clearance accommodates larger dishes, glasses and half size sheet pans.
- Upper and lower rotating wash and rinse arms blast water in all directions for optimum cleaning and rinsing.
- All stainless steel construction.
- Built-in booster heater.
- Built-in wash tank heater.
- Low water consumption. Uses only .68 gallons of water per cycle.
- Pumped drain.
- All Stainless Steel wash pump.
- Built in chemical dispensers with top mounted prime switches.
- Built in Delime switch.
- Stainless steel filters protect wash pump.
- 28 racks / 140 covers per hour.
- 1 Flat rack and 1 Peg rack included.
Specifications:
- Model: 180UC 3 W/DISPENSERS
- Water Consumption:
- Per Rack: .68 GAL
- Per Hour: 19 GAL
- Operating Cycle:
- Wash Time (seconds): 99
- Rinse Time (seconds): 11
- Dwell Time (seconds): 10
- Total Cycle (seconds): 2 Minutes
- Operating Capacity:
- Racks Per Hour: 28
- Wash Tank Capacity: 2.5 GAL
- Pump Capacity: 38 GPM
- Water Requirements:
- Required Minimum Temp: 120°F
- Recommended Temp: 140°F
- Water Inlet: 1/2″
- Drain Connection: 1″
- Rinse Pressure Set: 20 +5psi
- Operating Temperature:
- Wash °F (Minimum): 160°F Minimum
- Rinse °F (Minimum): 180°F-195°F
- Wash Pump Motor HP: 3/4
- Frame Dimensions:
- Depth: 25″
- Width: 24″
- Height: 33-1/4″
- Max Clearance for Dishes: 14-1/2″
- Electrical Rating:
- Voltage: 208/60/1
- Total Amps: 30
- Booster Heater KW: 5.3
- Wash Heater KW: 2.2
- This system requires two power wires (supplied by CMA) no neutral wire needed. An additional third wire must be provided for machine ground.
Reviews
There are no reviews yet.